Golden Age Project

R1 Tube Active MKII

Tube Active Ribbon Microphone

The R1 Tube Active Mic is like a missing link of true old-school vintage recording. The R1 Tube Active is like a missing link of true old-school vintage recording in that it combines three vintage elements:

  • A classic ribbon transducer.
  • Two transformers.
  • A tube buffer amplifier.

You might think that a ribbon, transformers and a tube amplifying stage will make the signal too smooth? 

It's true that the sound of the R1 Tube Active is truly warm and fat, but the combination of the tube stage and the transformers will generate overtones that makes the signal come alive.

If you are into mics, if instant no-need-to-mix good-sounding recording is your thing, if you are looking for a unique yet versatile mic, this is it!

Features:
  • The natural and musical sound of a classic ribbon mic combined with the consistent sound-quality you get from active electronics
  • A low-noise 12AX7 tube amplifier that isolates the ribbon and gain make-up transformer from the outside world, and gives you higher output than a normal ribbon mic
  • Ultra-realistic reproduction
  • Characteristic large-and-mellow ribbon sound quality with a very smooth top and an extended low end
  • Fast and life-like transient reproduction
  • Ultra-high SPL capability: 165 dB SPL (1% THD @ 1000 Hz)
  • Very high sensitivity for a ribbon microphone, similar to many condenser mics
  • The figure-8 polar pattern offers wide sweet spots both in the front and in the back of the microphone, and rejection on the sides
  • A 50mm long ribbon made of 2 microns thick aluminum foil
  • An internal shock mount for the ribbon and magnet assembly
  • A removable microphone cable and an aluminum flight case
  • Manufactured from the finest materials for great performance and long-term reliability
  • Can be used with any standard mixer or preamp, preferably with a balanced input
Specifications:
  • Transducer: Ribbon
  • Polar Pattern: Figure-8
  • Frequency Range: 30 Hz to 18 kHz
  • Equivalent Noise Level: 16 dB A-Weighted
  • Maximum SPL: 165 dB SPL
  • THD: < 1%
  • Impedance: 200 Ohms
  • Load Impedance: 1000 Ohms
  • Sensitivity: -40 dB at 1 kHz
  • Output Connectors: 1 x 3-Pin XLR